Collapsible 10-litre PE-plastic water container with tap valve, carry handle, and large outlet for selected cold-water storage and dispensing
Description
This hydrozilla container has a listed 10-litre capacity, collapsible body, carry handle, cap, tap valve, and approximately 3 cm filling outlet as shown/listed. It is intended for temporary storage or dispensing of compatible cold or room-temperature water in suitable indoor, travel, camping, or outdoor settings. Material, coating, cleanliness, closure, temperature, pressure, transport, and storage determine whether a specific use is appropriate.
Key features
- Approximate capacity: 10 litres as listed; usable volume may vary with filling and the container’s shape.
- Collapsible format for storage when empty and completely dry.
- ON/OFF tap valve, cap, carry handle, and large approximately 3 cm outlet as listed or shown.
- PE plastic body as listed; exact grade, additives, coating, and food-contact certification are not confirmed.
- Approximate listed dimensions: 24 cm length × 22 cm width × 13 cm height; approximate weight 216 g.
- Suitable for selected cold or room-temperature water use only after checking the product label and intended-contact guidance.
Water, hygiene, and safety notes
- Before using for drinking or food-contact water, verify the received product’s food-contact certification, material marking, cleaning instructions, and suitability with the manufacturer. Do not assume BPA-free, food-grade, non-toxic, potable-water-safe, or chemical-free status from this listing alone.
- Use only clean, compatible cold or room-temperature water unless the manufacturer provides a specific temperature rating. Do not fill with boiling water, hot drinks, oils, solvents, fuel, chemicals, medicines, dairy, or carbonated liquids.
- Inspect the body, seams, outlet, cap, valve, handle, and folds before each use. Do not use if cracked, punctured, cloudy, sticky, odorous, leaking, deformed, contaminated, or difficult to clean.
- Rinse and wash using a compatible mild detergent and clean water before first use and after use. Rinse thoroughly, drain the tap and outlet, open fully, and air-dry completely before collapsing or storing.
- Do not use bleach, solvents, abrasive brushes, boiling water, dishwasher cycles, or strong chemicals unless the manufacturer specifically permits them. Residue may remain in folds, cap threads, or the tap.
- Use on a clean, flat, stable surface and keep the container upright. Do not drag, drop, stack on, sit on, suspend from the handle, or place under heavy objects; the handle, seams, tap, or plastic may fail.
- Close the cap and tap gently and test for leakage over a sink or outside before transport. Do not rely on the container for leak-free storage, pressurised dispensing, long-term storage, or transport in a vehicle without secondary containment.
- Leave headspace and avoid overfilling, squeezing, puncturing, sharp surfaces, excessive folding, freezing, direct sun, hot vehicles, radiators, open flames, and prolonged heat. Plastic may soften, expand, contract, crack, or deform.
- Keep the outlet and tap away from soil, insects, hands, animals, drains, and dirty surfaces. Do not drink directly from a shared tap without suitable hygiene control.
- Do not use for medical, infant, emergency-life-support, fire-fighting, chemical, laboratory, aquarium, or other critical storage applications unless specifically certified for that purpose.
- Keep away from children and pets; a filled 10-litre container is heavy, the tap may create a spill hazard, and plastic, caps, and packaging may present injury, choking, ingestion, or suffocation hazards. Do not allow a child or animal to climb, sit, or play inside it.
- Store empty, open, completely dry, folded only as permitted, and protected from pests, dust, moisture, sharp objects, chemicals, heat, and crushing. Replace after contamination or material ageing.
- Capacity, flexibility, odour, taste, leak resistance, service life, portability, temperature tolerance, and food-contact suitability vary; no leakproof, durable, robust, BPA-free, non-toxic, or universal-use result is guaranteed.
Specifications
-
Type: Collapsible water container
-
Capacity: Approximately 10 litres as listed
-
Material: PE plastic as listed; exact grade/certification not confirmed
-
Features: Tap valve, cap, carry handle, and approximately 3 cm outlet as shown/listed
-
Dimensions: Approximately 24 cm × 22 cm × 13 cm as listed
-
Weight: Approximately 216 g
-
Suitable use: Selected cold or room-temperature water storage after material and hygiene verification
-
Package contents: 1 collapsible container
