Adjustable phone holder for selected vehicle mounting positions
Description: Velvet Wheels holder is listed with air-vent and dashboard mounting options, an adjustable device width of 58–85 mm, maximum thickness of 23 mm, a spring clamp, and a fixing nut. The listing describes one-hand insertion/removal, rotation, and adjustable viewing. Actual fit, holding strength, road vibration performance, vehicle compatibility, dashboard adhesion, vent compatibility, materials, and certification are not independently confirmed. Listed dimensions are 17 cm × 12 cm × 5 cm and listed weight is 58 g.
Key features
- Adjustable 58–85 mm width and up to 23 mm thickness as listed; measure the device with its case, ring, pop socket, cable, and accessories before use.
- Air-vent and dashboard mounting as listed; use only the mounting method and vehicle surface suitable for the received unit.
- Spring clamp and fixing-nut wording as listed; inspect the clamp, nut, pads, joints, bracket, and contact surfaces before driving.
- Viewing adjustment/rotation and one-hand insertion/removal wording as listed; adjust while parked, not while moving.
- One holder supplied unless the received package states otherwise. Phone, case, dashboard pad, tools, and accessories are not included unless listed.
Vehicle, device, and safety notes
- Read the received holder, vehicle, vent, dashboard, device-fit, airbag, adhesive, and warning instructions before installation. Confirm the phone and case fit without pressing buttons, ports, cameras, speakers, wireless charging coils, or controls.
- Install while parked on a stable surface. Test the empty holder, then the device, and check for movement, slipping, obstruction, vibration, heat, and visibility before driving.
- Do not mount over airbags, airbag covers, instrument panels, gauges, steering controls, pedals, gear selectors, mirrors, windscreens, hazard switches, vents needed for demisting, or any area that blocks a driver’s view or vehicle control.
- Do not attach to a weak, textured, oily, wet, dusty, cracked, loose, painted, leather, fabric, heated, or fragile dashboard unless the received mounting method expressly permits it. Test a discreet area because pads or adhesive may leave residue or lift a finish.
- For vent mounting, verify the vent slat can support the holder and device without breaking, closing, blocking airflow, or interfering with demisting. Do not force the clamp onto incompatible or fragile vents.
- Use only a compatible device within the listed dimensions. Do not rely on universal compatibility. Remove thick cases, accessories, or cables if they prevent full contact, obstruct controls, or make the device unstable.
- Keep the screen and navigation view visible without obstructing the road. Program navigation, select music, and make calls before moving; use voice control or a passenger where lawful. Never type, read messages, photograph, or manually operate the phone while driving.
- The holder is not a safety restraint. Do not place a device that could injure someone if detached, and do not use the holder to support people, pets, objects, tools, tablets outside the fit range, or loose valuables.
- Close the holder and secure the device before driving. Stop safely if the phone, holder, clamp, pad, bracket, or vent moves, rattles, overheats, loosens, obstructs visibility, or interferes with vehicle controls.
- Keep the device and holder away from direct sun, heaters, defrosters, hot dashboards, flames, liquids, condensation, and extreme temperatures. Heat can affect devices, batteries, adhesives, plastics, and dashboard surfaces.
- Do not modify, drill, glue, tape, wire, lubricate, or repair the holder unless the received instructions permit it. Do not use damaged, cracked, sharp, stretched, or contaminated pads, clamps, nuts, or brackets.
- Keep children and pets away from the holder, clamp, fixing nut, pads, packaging, and detached device. These may present pinch, choking, ingestion, cut, fall, and entanglement hazards. Do not allow use as a toy.
- Wipe with a soft, dry or slightly damp cloth if the received instructions permit. Do not soak, spray cleaners into the clamp or joints, use solvents/abrasives, or apply heat to unknown adhesive.
- Remove the phone before removing or repositioning the holder. Loosen the fixing nut and release the clamp according to the received instructions; do not pull abruptly or use tools against the dashboard or vent.
- Store the holder empty, clean, dry, and protected from crushing, heat, moisture, chemicals, children, pets, and loose metal objects. Keep phone and holder separate when not installed.
- Dispose of damaged plastic, metal, rubber/pad, packaging, and adhesive residue through local household-waste or recycling guidance. Do not burn unknown plastics or allow children/pets to ingest pads or fragments.
- Fit, grip, rotation, viewing angle, device compatibility, dashboard/vent protection, vibration resistance, road performance, safety, durability, reliability, ease, and service life vary; no secure, strong, robust, reliable, universal, all-phone, safer-driving, one-hand-safe, bumpy-road, durable, or guaranteed result is promised.
Specifications
-
Type: Adjustable car phone holder
-
Mounting: Air vent or dashboard wording as listed; verify vehicle compatibility
-
Device range: 58–85 mm width; maximum 23 mm thickness as listed
-
Mechanism: Spring clamp, fixing nut, and adjustment/rotation wording as listed
-
Listed dimensions: 17 cm × 12 cm × 5 cm
-
Listed weight: 58 g
