Three screw-style mandrels for compatible rotary tools and abrasive discs with a matching centre hole
Description
This Cisora set includes three cut-off-wheel screw mandrels as shown. Each mandrel is intended to hold a compatible small abrasive disc, sheet, paper, or cloth accessory when the shaft, screw, washer, disc opening, tool chuck, and operating speed match the manufacturer’s specifications. The mandrels are accessories only; abrasive wheels are not confirmed as included.
Key features
- Three cut-off-wheel screw mandrels included.
- Suitable for compatible rotary-tool accessories with a matching centre hole.
- May support suitable small grinding discs, resin cut-off sheets, sanding papers, polishing papers, or cloth abrasives when the accessory instructions permit.
- Approximate listed dimensions: 13 cm length × 8 cm width × 2 cm height; approximate weight 14 g.
- Designed for workshop, repair, craft, and DIY use with compatible equipment.
- 1 set of 3 mandrels included; discs are not confirmed as part of the package.
Installation, tool, and safety notes
- Confirm mandrel shaft diameter, screw and washer arrangement, chuck or collet size, accessory centre-hole size, tool instructions, disc rating, and maximum speed before use. Do not assume Dremel, drill, grinder, pneumatic-tool, or brand compatibility.
- Disconnect power or remove the battery before installing, changing, or adjusting a mandrel or abrasive accessory.
- Install the disc and washer in the correct order, tighten securely without over-tightening, and check that the disc runs true with no wobble, crack, bend, or looseness.
- Use only accessories rated for the selected tool and speed. Never use a damaged, expired, wet, contaminated, or unbalanced disc.
- Secure the workpiece, use suitable eye and hearing protection, and consider respiratory protection for dust. Keep hands, hair, clothing, cords, and bystanders away from rotating parts.
- Start at a low compatible speed and use light, controlled pressure. Avoid side loading, jamming, forcing, sudden contact, and prolonged cutting that can generate heat or break the disc.
- Cutting, grinding, sanding, and polishing capabilities depend on the accessory and workpiece. Do not assume the mandrel itself cuts or deburrs materials or produces a clean finish.
- Do not use on live electrical parts, skin, teeth, medical devices, food, or applications requiring certified machine guarding or abrasive equipment.
- Stop immediately if vibration, noise, heat, sparks, smoke, unusual odour, slippage, or workpiece damage occurs. Allow the tool and accessory to cool before inspection.
- Keep the mandrels clean and dry. Wipe with a soft cloth and store away from moisture, chemicals, direct heat, children, and pets.
- Inspect threads, screw head, washer, shaft, and any fitted disc before each use. Replace worn or damaged components and dispose of abrasive debris safely.
Specifications
-
Type: Cut-off-wheel screw mandrel set
-
Quantity: 3 pieces
-
Mounting: Shaft, screw, and washer arrangement as shown; verify dimensions before use
-
Dimensions: Approximately 13 cm × 8 cm × 2 cm as listed
-
Weight: Approximately 14 g
-
Compatibility: Suitable only with matching rotary-tool chuck/collet and abrasive accessory
-
Package contents: 3 mandrels; abrasive discs are not confirmed as included
