Decorative frog-design adhesive hook for selected smooth, clean, dry surfaces
Description: This GlimmerHome hook is a one-piece frog-design wall hook with an adhesive backing, intended for selected lightweight organisation on suitable smooth surfaces. The listing describes ABS-style plastic and approximately 10 cm × 7 cm × 2 cm dimensions with a 31 g weight. Exact adhesive chemistry, surface rating, load capacity, cure conditions, moisture performance, material grade, and wall-finish compatibility are not reliably stated.
Key features
- One frog-design hook as listed/shown.
- ABS-style plastic construction as listed; exact grade is not confirmed.
- Adhesive backing for selected clean, dry, smooth surfaces; no drilling is required for the listed installation method.
- Suitable only for lightweight items after a surface and load test.
- Approximate listed dimensions: 10 cm × 7 cm × 2 cm; approximate weight: 31 g.
Installation, load, and care notes
- Inspect the hook, adhesive pad, backing film, edges, surface, and packaging. Do not install if cracked, loose, contaminated, deformed, or damaged.
- Use only on a clean, smooth, dry, sound, non-porous surface after testing. Avoid dusty, greasy, oily, wet, rough, porous, peeling, wallpapered, freshly painted, textured, damp, or temperature-sensitive surfaces unless the received instructions permit it.
- Clean with a compatible method and allow the surface to dry completely. Do not touch the adhesive with fingers, stretch it, or apply over dust, moisture, wax, or residue.
- Press firmly across the adhesive area and allow at least the listed 12-hour set period before hanging anything. Longer cure may be needed depending on temperature, humidity, surface, and adhesive condition.
- Do not assume a 2 kg capacity or heavy-duty hold. Begin with a very light item, keep the load close to the wall, avoid swinging or impact, and never hang people, appliances, glass, sharp tools, valuables, or anything that could injure someone when it falls.
- Load, adhesion, and service life vary with surface, temperature, humidity, vibration, item shape, and installation. Check periodically and remove the load if the hook lifts, tilts, cracks, or feels loose.
- Keep away from water spray, steam, condensation, rain, direct sunlight, heaters, flames, oils, solvents, bleach, and cleaning chemicals. Humidity resistance is not confirmed.
- Do not use on electrical wiring, gas lines, structural supports, safety equipment, food-contact surfaces, or places where a falling item could cause harm.
- Remove slowly from one edge only when the load is removed. Adhesive may lift paint, polish, wallpaper, coating, grout, plaster, or surface fibres; test removal in an inconspicuous area first.
- Do not yank, twist, scrape aggressively, use uncontrolled heat, or apply solvent without checking the wall finish.
- Wipe the hook with a soft, dry or lightly damp cloth. Do not soak, pressure-wash, or place a wet item on it unless the received product is rated for that use.
- Keep away from children and pets; the hook, adhesive, backing film, packaging, and falling items may present choking, ingestion, impact, cut, and entanglement hazards. This is not a toy.
- Store unused hook clean, dry, flat, covered, and with the backing film attached. Protect from heat, moisture, sunlight, crushing, chemicals, children, and pets.
- Dispose of used adhesive, plastic, backing film, and packaging responsibly; do not burn the material or allow scraps to enter mouths, drains, or animal habitats.
- Adhesion, load, moisture response, removal, wall-finish compatibility, durability, and service life vary; no strong, reliable, heavy-duty, 2 kg, damage-free, effortless, durable, reusable, humidity-resistant, universal, space-saving, or secure result is guaranteed.
Specifications
-
Type: Decorative adhesive wall hook
-
Quantity: 1 piece
-
Design: Frog shape as shown
-
Material: ABS-style plastic as listed; exact grade not confirmed
-
Dimensions: Approximately 10 cm × 7 cm × 2 cm
-
Weight: Approximately 31 g
