Dashboard magnetic phone holder with adjustable viewing position
Description: Gambit holder is shown with a cartoon astronaut design, magnetic phone interface, adhesive rubber pad, and dashboard mounting. The listing states 360-degree rotation and 60-degree upward tilt; verify the received range and movement. Exact magnet strength, phone/cover compatibility, adhesive type, load limit, dashboard compatibility, temperature tolerance, surface residue, and safety certification are not independently confirmed. This is a positioning accessory, not a driving-safety device.
Key features
- 360-degree rotation and 60-degree upward-tilt wording as listed; actual movement depends on the received joint and installation.
- Magnetic holding design as shown; a suitable magnetic plate or compatible phone case may be required and is not confirmed as included.
- Cartoon astronaut styling as shown; colours and finish may vary by batch.
- Adhesive rubber-pad mounting as listed; clean, dry, compatible surfaces are required for installation.
- For selected car-dashboard use only. One holder supplied unless the received package states otherwise. Phone, case, magnetic plate, and vehicle are not included.
Device, dashboard, and driving-safety notes
- Read the received installation guide, compatibility notes, warnings, temperature limits, and included-parts list before use. Inspect the holder, magnet, joint, pad, edges, backing film, and packaging.
- Do not use if cracked, loose, warped, sharp, damaged, overheated, contaminated, or unable to hold the intended device during a stationary test.
- Check phone weight, case thickness, magnetic plate position, wireless-charging compatibility, compass function, camera clearance, and device manufacturer guidance. Do not assume compatibility with every phone, case, brand, model, or charger.
- Magnets may affect magnetic cards, key fobs, storage media, watches, hearing devices, medical implants, sensors, and some electronics. Keep the phone and holder away from items that may be affected and follow manufacturer guidance.
- Clean the dashboard according to vehicle instructions, allow it to dry, press the pad as directed, and allow any stated curing time before mounting a phone. Do not install over textured, dusty, oily, wet, peeling, leather, fabric, painted, heated, or unknown surfaces unless expressly approved.
- Do not place the holder where it blocks the windscreen, mirrors, instrument panel, controls, vents, defroster, emergency access, or driver view. Never mount over or near an airbag, airbag cover, steering wheel, or deployment path.
- Set the viewing angle before moving. The holder must not be adjusted, removed, or used to handle the phone while driving. Pull over safely before touching the phone or changing navigation.
- Hands-free mounting does not make calls, messages, navigation, video, or other phone use safe or lawful. Follow Indian traffic rules and the vehicle manufacturer’s instructions; the driver remains responsible for attention.
- Test the hold on a stationary vehicle and low-risk route before normal use. Road vibration, braking, heat, sunlight, dust, moisture, phone weight, case, adhesive age, and surface condition can cause movement or detachment. Do not rely on it to prevent a device from falling.
- Keep away from direct sunlight through a windscreen, heaters, hot vents, flames, chemicals, water, and temperatures outside the received label range. Do not clean with solvents, oil, abrasive products, or excess liquid.
- Remove adhesive slowly according to the vehicle manufacturer’s guidance. Residue, finish change, paint lift, or surface damage may occur; test an inconspicuous area first and do not claim damage-free removal.
- Keep adhesive film, magnets, small parts, packaging, and detached pieces away from children and pets; they may present choking, ingestion, suffocation, pinch, and magnet-ingestion hazards.
- Store clean, dry, detached from the phone, and protected from heat, crushing, moisture, chemicals, children, pets, cards, and sensitive electronics.
- Dispose of adhesive pads, plastic, metal, magnets, and packaging through local household-waste guidance. Do not burn or dismantle magnets.
- Grip, phone compatibility, rotation, tilt, stability, dashboard adhesion, residue, durability, visibility, charger performance, and service life vary; no powerful, strong, secure, universal, all-phone, safer-driving, permanent, damage-free, rough-road, durable, or guaranteed result is promised.
Specifications
-
Type: Magnetic car dashboard phone holder
-
Design: Cartoon astronaut as shown
-
Adjustment: 360-degree rotation and 60-degree upward-tilt wording as listed; verify received unit
-
Mounting: Adhesive rubber pad as listed; surface compatibility must be checked
-
Included: Holder only unless received package states otherwise
