Three bullet-shaped red-corundum grinding bits for compatible rotary tools and tested light grinding, shaping, or deburring tasks
Description
This ToolMate Pro set includes three bullet-shaped abrasive bits with shanks as shown. The source listing describes the abrasive as red corundum. They are intended for suitable light grinding, shaping, polishing, or deburring only when the shaft, chuck or collet, tool, speed, guard, bit, and workpiece are compatible. Results vary with pressure, direction, material, abrasive grade, and equipment settings.
Key features
- Three bullet-shaped grinding bits included.
- Red-corundum abrasive as listed.
- Shank-mounted format for compatible rotary tools; confirm shaft diameter and chuck or collet fit before use.
- Suitable examples may include tested metal surfaces. Test glass, stone, ceramic, stainless steel, gems, wood, plastic, coatings, and other materials first and follow the tool or abrasive instructions.
- Approximate package dimensions and weight were not stated in the source listing; confirm received product measurements where required.
- 1 set of 3 bits included.
Tool, bit, and safety notes
- Confirm shank diameter, chuck/collet capacity, bit dimensions, wheel or bit rating, maximum speed, guard requirements, tool instructions, and permitted materials before use. Do not assume compatibility with every rotary tool, drill, grinder, or pneumatic tool.
- Disconnect power or remove the battery before changing a bit or adjusting the tool. Insert the shank fully, tighten correctly, and check for wobble, cracks, chips, looseness, contamination, or deformation before starting.
- Use the manufacturer-approved guard where required. Secure the workpiece and wear suitable eye and face protection, hearing protection, gloves appropriate to the task, and respiratory protection when dust may occur.
- Start at a low compatible speed with light, controlled pressure. Avoid side loading, jamming, forcing, sudden contact, and prolonged contact that can create heat, kickback, sparks, or bit breakage.
- Test the bit and technique on scrap or an inconspicuous area first. Grinding or polishing may remove material, alter dimensions, create grooves or scratches, damage coatings, change colour, or leave an uneven finish.
- Do not assume a specific polishing, deburring, surface, or material result. Use an abrasive rated for the exact task and replace it when worn or contaminated.
- Grinding may produce dust, sparks, hot fragments, sharp edges, and noise. Keep flammable liquids, fuel, gas, chemicals, wood dust, and ignition-sensitive materials away from the work area.
- Stop if the bit vibrates, binds, overheats, chips, cracks, smokes, sparks unexpectedly, or produces unusual noise or odour. Switch off, isolate, and cool the tool before inspection.
- Do not use on skin, teeth, food, medical devices, live electrical parts, or applications requiring certified abrasive or machine-guarding equipment.
- Keep the bits dry and supported away from moisture, direct heat, chemicals, children, and pets. Do not drop or strike the abrasive heads or shanks.
- Clean only as permitted by the manufacturer; do not use solvents, water, or compressed air in a way that damages the abrasive or spreads dust. Store in a closed, dry container.
- Inspect before every use and dispose of worn, cracked, chipped, or unbalanced bits according to local waste guidance. No fixed service life, low-heat, low-dust, quiet, universal, professional, or damage-free result is guaranteed.
Specifications
-
Type: Mounted rotary grinding-bit set
-
Quantity: 3 pieces
-
Abrasive: Red corundum as listed
-
Form: Bullet-shaped bits as shown
-
Mounting: Shank-mounted; confirm chuck/collet and shaft compatibility
-
Use: Tested compatible light grinding, shaping, polishing, or deburring tasks
-
Package contents: 3 grinding bits; tool and extra mandrel not confirmed as included
