Wall-mounted toothpaste dispenser and four-brush holder reference
Description: BrushedUp unit is listed as an automatic or one-push toothpaste dispenser with a vacuum-pump/silicone-system reference, integrated storage for up to four toothbrushes, white ABS-plastic appearance and adhesive wall-mount reference. It is shown for selected standard toothpaste tubes. Verify the tube neck and thread size, paste viscosity, pump compatibility, dispensing amount, adhesive type and load, wall-surface suitability, water exposure, dimensions, included parts and cleaning instructions from the received product and packaging.
Key features
- One-push or automatic dispensing reference; prime the system and adjust use according to the received instructions. Dispensing amount, consistency and ability to handle different pastes may vary.
- Four-toothbrush storage reference; verify slot size, brush-head clearance, spacing, ventilation and whether toothbrushes are included.
- Adhesive wall-mount reference for clean, dry, smooth surfaces such as selected tile or glass; verify wall compatibility, adhesive curing time and supported load before mounting.
- White ABS-plastic appearance reference; verify polymer, finish, water resistance and material documentation.
- One dispenser, mount and any supplied adhesive or parts only as stated on the received package. Toothpaste, toothbrushes, wall hardware and other bathroom accessories are not included unless listed.
Installation, hygiene, water and dispensing safety
- Read the received instructions before installation. Clean and fully dry the wall, apply adhesive as directed, press evenly, allow the specified curing period and test the empty mount before loading paste or toothbrushes.
- Do not mount on dusty, wet, oily, greasy, rough, peeling, painted, wallpapered or unstable surfaces unless the adhesive manufacturer permits them. Do not drill or use wall anchors unless the mounting design and instructions expressly allow it.
- Check the dispenser remains firmly attached and level. Do not exceed the adhesive, holder or wall load, hang towels or bags from it, or place it above a person, sink edge, electrical socket or fragile object where a fall may injure or contaminate items.
- Confirm the toothpaste tube neck, cap, seal, thread and paste consistency match the dispenser. Do not force a tube, use damaged or expired paste, mix products, or leave a leaking tube attached.
- Keep toothpaste outlet, pump and tube connection covered or clean as directed. Do not touch the outlet with a used brush, rinse water into the dispenser, share a nozzle without hygienic cleaning, or allow toothpaste to remain exposed to dust, insects or splash.
- Keep the unit away from direct shower spray and standing water. Disconnect or remove only as instructed before rinsing; do not submerge a pump or use electrical parts if present near water.
- Dispense onto a clean toothbrush and do not return unused paste to the tube or reservoir. If the paste changes smell, colour, texture or cleanliness, discard it and clean the relevant parts.
- Clean the exterior and toothbrush holder regularly with mild soap and water if permitted. Remove paste residue from outlets and removable parts using the received instructions; rinse only parts approved for rinsing and dry fully before reassembly.
- Do not use bleach, solvents, abrasive pads, boiling water, high-pressure spray or harsh chemicals. Do not disassemble the pump, cut the tube, alter the adhesive or modify the outlet unless directed.
- Inspect mount, adhesive, housing, pump, tube connection, outlet, slots and any removable parts for cracks, loose pieces, mould, residue, blockage or detachment. Stop use if it dispenses unpredictably, leaks, falls, or changes the toothbrush’s cleanliness.
- Replace or remount if the adhesive loses hold. Do not rely on the dispenser or holder to prevent contamination, germs, waste, spills or injury; follow normal toothbrush, paste and oral-care hygiene guidance.
- Keep small caps, adhesive liners, packaging and detached parts away from children and pets because they may create choking or ingestion hazards. A child should use the dispenser only with adult supervision and only after the mount and paste outlet have been checked.
- Compatibility, dispensing precision, hygiene, paste savings, leak resistance, adhesion, load, water resistance, durability, safety and service life vary; no effortless, hygienic, precise, optimal, mess-free, waste-preventing, durable, safe, non-toxic, germ-reducing, universal or guaranteed result is promised.
Specifications
-
Type: Wall-mounted toothpaste dispenser with toothbrush holder
-
Dispensing: Automatic or one-push vacuum-pump/silicone-system reference; verify operation
-
Holder: Up to four toothbrushes as listed; verify slot dimensions
-
Mount: Adhesive tape reference; verify surface and curing requirements
-
Body: White ABS-plastic reference; verify material and water limits
-
Compatibility: Selected standard toothpaste tubes; measure neck and thread before use
