Lever-trigger hose nozzle with adjustable spray head for selected garden watering, vehicle rinsing, and outdoor cleaning tasks
Description
This Grow Garden Tools water spray gun has a lever-style handle, an adjustable nozzle head, and an alloy-copper-style head with rubberized-grip styling as shown. It is intended for selected garden, vehicle, and outdoor cleaning tasks when connected to a compatible hose. The listing gives approximate dimensions of 20 cm × 11 cm × 4 cm and approximate weight of 97 g. Exact connector standard, pressure rating, flow rate, spray pattern range, alloy composition, seal materials, leak performance, and chemical compatibility are not reliably stated. Confirm the received connector and hose fit before pressurising.
Key features
- Lever-trigger operation and adjustable spray head as shown.
- Fine-to-broad spray adjustment may be available; actual patterns and output vary by nozzle position, hose pressure, and received unit.
- Alloy-copper-style head and rubberized-grip-style handle as listed/shown; exact material grades are not confirmed.
- Suitable for selected plant watering, vehicle rinsing, windows, paths, and outdoor furniture after surface and pressure checks.
- Approximate listed dimensions: 20 cm length × 11 cm width × 4 cm height; approximate weight 97 g.
- One spray gun supplied; hose, connector adapters, washers, cleaning chemicals, and other accessories are not included unless stated.
Connection, water, and safety notes
- Inspect the head, trigger, grip, nozzle threads, connector, seals, and packaging before use. Do not connect a cracked, loose, deformed, corroded, blocked, or damaged unit.
- Check the hose thread/connector and washer against the received nozzle. Do not force incompatible threads, cross-thread, overtighten, use improvised tape or clamps, or assume compatibility with every Indian garden hose.
- Start with the water supply off and open it gradually. Test the connection and spray at low pressure in an open area; maximum pressure and flow rating are not confirmed.
- Never point the nozzle at people, animals, eyes, ears, face, skin, open wounds, vehicles in motion, windows, fragile objects, or electrical equipment. Pressurised water can injure, startle, damage surfaces, and propel debris.
- Wear suitable eye protection and footwear when cleaning dirt, soil, or debris. Keep bystanders and pets away, and do not use the jet to clean skin, clothing while worn, wounds, or animals.
- For plants, begin with a gentle spray and keep the nozzle far enough away to avoid disturbing soil, stems, leaves, seedlings, or containers. The nozzle is not a pesticide, fertiliser, fire-fighting, or irrigation-control device.
- For vehicles, test on a hidden area and use clean water only unless the received material instructions approve a product. Avoid close-range spray on paint, decals, seals, bearings, sensors, cameras, vents, engine bays, brakes, tyres, and open windows.
- For windows, paths, furniture, and painted surfaces, confirm the surface and pressure are compatible. Water may stain, loosen finishes, enter joints, or damage porous materials.
- Do not use with petrol, diesel, acids, alkalis, solvents, bleach, pesticides, fertilisers, oils, abrasive slurries, hot water, steam, or unknown chemicals unless the nozzle, hose, seals, and local instructions expressly permit it. Do not mix chemicals in the hose.
- Keep the spray away from sockets, plugs, chargers, extension leads, motors, lights, panels, batteries, and other electrical devices. Switch off and isolate nearby electrical equipment before wet cleaning.
- Do not leave the hose pressurised or the trigger locked unattended. Close the supply after use, release residual pressure safely, disconnect without spraying yourself, and drain the hose/nozzle.
- Do not use in freezing conditions or store with trapped water; freezing may expand and damage the head, seals, connector, or hose. Protect from flame, heaters, direct sun, hot vehicle interiors, and extreme temperatures.
- Clean with fresh water after use and dry the exterior. Do not use abrasive tools or harsh chemicals; check the nozzle for mineral deposits and clear only with a method compatible with the received materials.
- Inspect after each use for leaks, swelling, cracks, corrosion, trigger sticking, seal damage, blocked patterns, grip separation, or hose movement. Stop use and replace damaged seals or the unit rather than relying on a compromised connection.
- Keep away from children and pets; pressurised water, flexible hoses, detached seals, packaging, and small components may present impact, eye, ingestion, entanglement, drowning, and slipping hazards. This is not a toy.
- Store disconnected, depressurised, drained, clean, dry, and protected from heat, freezing, sunlight, chemicals, crushing, children, and pets. Do not hang from the trigger or connector.
- Spray pattern, pressure, flow, connector fit, leak performance, comfort, durability, chemical resistance, and service life vary; no durable, robust, superior, powerful, ergonomic, fatigue-reducing, leak-proof, universal, or longevity result is guaranteed.
Specifications
-
Type: Garden hose spray nozzle
-
Operation: Lever trigger with adjustable head as shown
-
Head: Alloy-copper-style as listed; exact composition not confirmed
-
Grip: Rubberized-style as shown
-
Dimensions: Approximately 20 cm × 11 cm × 4 cm
-
Weight: Approximately 97 g
-
Use: Selected low-to-moderate outdoor watering and rinsing tasks after connector and pressure checks
