Adhesive phone holder with watermelon enamel design
Description: TinyTrendy holder is listed with an enamel-filled watermelon design, adhesive backing, and a stand/car-mount reference. Listed closed diameter is 38.8 mm, closed height 7.7 mm, and expanded height 24.3 mm; the product-dimensions field lists height 2.43 cm. It is intended as a supplementary phone grip or stand on a compatible smooth case or surface. Actual metal, enamel, adhesive, phone compatibility, load, angle, vibration resistance, vehicle compatibility, and dimensions require verification from the received product and packaging.
Key features
- Watermelon enamel design reference as listed; confirm finish, colour, edges, and attachment surface.
- Adhesive-backed attachment reference as listed; clean, dry, smooth surfaces generally provide better bonding, but compatibility and cure time require verification.
- Stand and car-mount references as listed. Use in a vehicle only where it does not obstruct the driver’s view, controls, mirrors, airbags, sensors, or legally required equipment.
- Listed dimensions: 38.8 mm closed diameter, 7.7 mm closed height, and 24.3 mm expanded height; compare with the phone and case before attachment.
- One holder supplied unless the received package states otherwise. Phone, case, replacement adhesive, and vehicle accessories are not included unless listed.
Attachment, phone, and driving safety
- Before attaching, check the case or surface for dust, oil, texture, peeling, coatings, wireless-charging areas, and manufacturer restrictions. Do not attach to cracked, fragile, wet, dirty, fabric, silicone, leather, or porous surfaces unless approved.
- Press evenly and allow the received adhesive cure time before pulling, folding, carrying, or placing the phone in a vehicle. Test over a soft surface first and inspect the bond regularly.
- Do not rely on the holder to prevent a phone from falling. Keep the phone supported during movement, impacts, cycling, walking, or use with heavy cases or accessories.
- Do not adjust, install, remove, text, photograph, or watch content while driving. Mount only where navigation can be used legally and without obstructing road visibility; follow local traffic rules.
- Keep the holder away from airbags, steering controls, dashboard vents, heat, direct sun, moisture, and locations where it could become a projectile or interfere with vehicle operation.
- Stop use if the holder, hinge, enamel, adhesive, case, or phone shows cracks, sharp edges, looseness, residue, overheating, or deformation. Remove before the adhesive fails and the phone falls.
- Remove slowly according to the received instructions. Adhesive may leave residue or damage paint, coatings, cases, or device surfaces; no residue-free or damage-free removal is guaranteed.
- Wipe the design with a soft, slightly damp cloth if permitted. Do not use abrasive pads, harsh chemicals, solvents, heat, or excess water near the adhesive or phone.
- Keep holder, adhesive film, packaging, and small parts away from young children and pets. Falling phones, sharp edges, adhesive, ingestion, and choking hazards require adult supervision.
- Grip, bond, load, angle, comfort, phone compatibility, stability, vibration resistance, portability, durability, removal, and service life vary; no secure, universal, perfect, enhanced, stable, compact, portable, durable, high-quality, reliable, effortless, or guaranteed result is promised.
Specifications
-
Type: Adhesive mobile phone holder and stand reference
-
Design: Watermelon enamel reference as listed
-
Closed dimensions: 38.8 mm diameter × 7.7 mm height
-
Expanded height: 24.3 mm reference
-
Attachment: Adhesive backing reference; verify surface and cure instructions
