Decorative LED light with a 3D-style optical illusion
Description: Indo Glow lamp is listed as a single LED decorative light using an optical acrylic light-guide plate with an engraved 2D graphic to create a 3D-style visual effect when illuminated. It is positioned for selected bedrooms, living rooms, drawing rooms, lobbies, offices, and other decorative spaces. Actual graphic, LED colour, brightness, power source, voltage, heat, base, acrylic composition, stability, and electrical certification require receipt-level verification. Listed dimensions are 13 cm × 10 cm × 6 cm and listed weight is 34 g.
Key features
- 3D-effect optical illusion wording as listed; it is not a physical three-dimensional object. Verify the supplied graphic, acrylic plate, base, and assembly.
- LED light reference as listed; verify colour, brightness, controls, power input, cable, adapter, battery, and operating limits.
- Selected decorative use in compatible indoor spaces. Do not assume suitability for bathrooms, outdoor areas, damp locations, children’s rooms, sleeping, reading, emergency lighting, or continuous operation.
- Single lamp as listed unless the received package states otherwise. Power adapter, batteries, remote, replacement plate, and accessories are not included unless listed.
Electrical, heat, and placement safety
- Read the received lamp, power-source, voltage, cable, acrylic, cleaning, and warning instructions before use. Use the actual rating label rather than the product title.
- Use only the supplied or explicitly compatible adapter, cable, battery, and power source. Do not modify, short, puncture, crush, open, heat, burn, or wet electrical or battery components.
- Keep plug, cable, switch, base, power port, and connections dry. Do not use with wet hands, near a bath, sink, steam, open window rain, or standing water. Never immerse the lamp or adapter.
- Place the lamp on a level, firm, dry, non-flammable surface with the base fully seated. Keep it away from edges, stairs, vibration, fans, pets, doors, and locations where it can be knocked over.
- LEDs and adapters may become warm. Keep ventilation clear and do not cover the lamp with fabric, paper, bedding, decorations, or packaging. Keep away from heaters, flames, aerosols, curtains, and combustible materials.
- Do not stare into the LED or direct it at eyes. Use the lowest comfortable brightness and stop if it causes glare, headache, discomfort, or sleep disturbance. A decorative lamp is not a medical or emergency light.
- Acrylic plates can scratch, crack, chip, or form sharp edges. Inspect before use, keep away from impact and children, and stop using a damaged plate or loose base.
- Keep cables routed away from walkways, heat, water, pets, and pinch points. Do not suspend, carry, pull, or hang the lamp by its cable.
- Switch off and unplug before changing the plate, moving, cleaning, inspecting, or clearing an obstruction. Allow the lamp and adapter to cool first.
- Clean with a soft, dry or slightly damp lint-free cloth only if permitted. Do not use abrasive pads, solvents, sprays, alcohol, bleach, boiling water, or pressure spray on acrylic, LED, base, or electronics.
- Inspect before each use for cracked acrylic, sharp edges, loose plate, exposed wiring, damaged cable, hot spots, flickering, sparks, unusual odour, or unstable base. Stop use and disconnect power if any fault appears.
- Keep children and pets away from the lamp, acrylic plate, cable, adapter, packaging, and small parts. These may present electrical, burn, glass-like sharp-edge, eye, tip-over, choking, and entanglement hazards. This is not a toy.
- Do not allow children to operate, disassemble, carry, sleep beside, or place objects on the lamp without close adult supervision. Keep away from cots, cribs, bedding, and infant sleep areas.
- Store switched off, unplugged, cool, clean, dry, and protected from impact, heat, moisture, chemicals, children, and pets. Keep the acrylic plate covered or separated to reduce scratching.
- Dispose of LED electronics, cables, acrylic/plastic, batteries, and packaging through local e-waste and recycling guidance. Do not burn or break the acrylic plate.
- Brightness, colour, energy use, warmth, eye comfort, optical effect, stability, durability, power compatibility, and service life vary; no energy-saving, bright, warm, gentle, sleep-promoting, durable, safe, stable, or guaranteed result is promised.
Specifications
-
Type: Decorative LED night light
-
Optical effect: Acrylic light-guide/engraved 2D graphic 3D-style illusion as listed
-
Pack: Single lamp as listed
-
Use: Selected indoor decorative spaces
-
Listed dimensions: 13 cm × 10 cm × 6 cm
-
Listed weight: 34 g
