Sports-car-style phone holder with 360-degree adjustment and sticky silicone-style base for selected stationary dashboard, windshield, or desktop use
Description
This Velvet Wheels phone holder has a sports-car-style body, 360-degree adjustment, and a sticky silicone-style base as shown. Use it only after checking the received holder, phone dimensions, base adhesion, mounting surface, and vehicle placement. The listed dimensions are approximately 15 cm × 8 cm × 6 cm and the listed weight is approximately 144 g. Exact phone-width range, clamp or retention method, adhesive composition, load limit, vibration rating, temperature rating, and material certification are not reliably stated.
Key features
- 360-degree adjustment as listed; move the angle while parked and tighten or secure the received joint as applicable.
- Sticky silicone-style base for selected clean, dry, smooth surfaces; adhesion is not guaranteed on every finish.
- Sports-car-style decorative body with ABS/PC-style materials as listed; exact resin grades are not confirmed.
- Dashboard, windshield, or desktop placement as shown, subject to visibility, surface, and local-use checks.
- Approximate listed dimensions: 15 cm length × 8 cm width × 6 cm height; approximate weight 144 g.
- One holder supplied; phone, charging cable, adhesive replacement, and other accessories are not included unless stated.
Installation, driving, and safety notes
- Inspect the body, joint, phone-contact points, silicone base, edges, and any included components before installation. Do not use if cracked, warped, loose, sticky in an abnormal way, or damaged.
- Clean and dry the chosen surface and phone-contact areas. Avoid dusty, greasy, wet, rough, textured, wallpapered, peeling, freshly painted, leather, fabric, porous, hot, or temperature-variable surfaces unless the received instructions permit them.
- Press the base evenly and allow any stated cure time before placing the phone. If no cure time is supplied, test the empty mount first and add the phone gradually. Do not repeatedly relocate or rinse the base unless the received care instructions expressly allow it.
- Check the phone’s width, thickness, case, camera bump, buttons, ports, and weight against the actual holder. Do not force a device into the mount or use it with a loose, cracked, slippery, oversized, or incompatible case.
- Use or adjust the holder only while parked. Never type, watch video, photograph, handle the phone, or change navigation while driving. Follow Indian traffic rules and keep the display out of the driver’s obstructed field of view.
- Do not place on airbags, steering controls, instrument clusters, pedals, gear selector, emergency controls, mirrors, windscreen sight lines, or any area where the holder or phone could interfere with vehicle operation or deployment.
- Adhesion, vibration resistance, and retention are not confirmed for bumpy roads, sudden braking, sharp turns, heat, cold, dust, humidity, or prolonged sunlight. Remove the phone if the base lifts, joint moves, or device begins to slide.
- Do not rely on the holder to protect the phone from drops, impacts, theft, overheating, or water. It is not a crash restraint, navigation guarantee, safety device, or replacement for attentive driving.
- Keep the phone and holder away from rain, condensation, spills, cleaners, flames, heaters, direct high heat, and charging cables under tension. Use only a compatible cable and do not charge a wet or overheating phone.
- Do not attach tablets, cameras, keys, bags, tools, drinks, children, pets, or any other load unless the received holder is specifically rated for it. Do not use as a handle, hook, mount for a suction load, or structural support.
- Keep magnets or magnetic components, if present in the received holder, away from magnetic strips, medical devices, hard drives, and magnetic-sensitive equipment. A magnetic feature is not confirmed by the listing.
- Clean the holder with a soft, dry or lightly damp cloth after removing the phone. Do not soak, spray, use solvents, bleach, abrasives, oils, or harsh chemicals on the body or sticky base.
- Inspect the mount, base, joint, holder arms, surface, phone case, and cable path regularly. Stop use if the adhesive peels, surface is damaged, plastic cracks, joint becomes loose, or phone retention changes.
- Keep away from children and pets; a falling phone or holder, adhesive pieces, packaging, and small components may present impact, choking, ingestion, entanglement, and eye-injury hazards. This is not a toy.
- Store clean, dry, protected from heat, sunlight, moisture, dust, chemicals, crushing, children, and pets. Keep the holder unloaded when not in use.
- Fit, viewing angle, adhesion, phone retention, vibration resistance, surface protection, material performance, durability, and service life vary; no universal, secure, bumpy-ride, durable, non-slip, environmental, longevity, effortless, damage-free, or safer-driving result is guaranteed.
Specifications
-
Type: Car phone holder
-
Design: Sports-car-style holder as shown
-
Adjustment: 360-degree rotation as listed
-
Base: Sticky silicone-style base as listed/shown
-
Dimensions: Approximately 15 cm × 8 cm × 6 cm
-
Weight: Approximately 144 g
-
Use: Selected stationary dashboard, windshield, or desktop placement after fit and visibility checks
