Approximate 550 ml insulated steel mug with handle and small cup for selected hot or cold drinks at home, work, or on the go
Description
This Own Hydrate mug is listed with an approximately 550 ml capacity, insulated steel construction, handle, and small cup as shown. The listed product dimensions are approximately 12 cm × 9 cm × 16 cm and the listed weight is approximately 401 g. Use only with beverages and temperatures compatible with the received product, lid, seal, and care instructions. Exact steel grade, insulation construction, temperature-retention time, lid design, seal performance, usable fill volume, and food-contact certification are not reliably stated.
Key features
- Approximately 550 ml nominal capacity as listed; leave headspace and do not fill to the rim.
- Insulated steel body with a carry handle as shown.
- Small cup included or integrated only as shown in the received set; confirm how it fits before use.
- Suitable for selected hot or cold drinks such as water, tea, coffee, or juice when the received care instructions permit it.
- Approximate listed dimensions: 12 cm length × 9 cm width × 16 cm height; approximate weight 401 g.
- One mug/set supplied; exact lid, cup, seal, straw, and accessory configuration may vary and must be checked on arrival.
Drink, temperature, and care notes
- Before first use, inspect the body, rim, handle, lid, cup, seams, coating, and any seal for cracks, dents, sharp edges, loose parts, stains, odour, or leakage. Wash before use.
- Test the mug with a small amount of a moderate-temperature drink before using very hot or cold liquids. Hot contents can cause burns even if the exterior feels cooler; handle and carry with care.
- Do not seal, shake, microwave, freeze, boil, or transport very hot carbonated liquids. Steam and pressure can build and cause sudden opening, spray, or scalding. Open away from the face and keep children away from hot contents.
- Keep the mug upright on a stable surface. The handle, lid, cup, and seals are not confirmed leak-proof or load-bearing; do not place in a bag until the received closure has been tested with cool water.
- Do not use for boiling oil, dry ice, alcoholic mixtures, corrosive chemicals, solvents, medicines, or liquids with pulp or particles that may obstruct the lid or seal unless the manufacturer specifically permits it.
- Do not use if the inner surface is scratched, corroded, peeling, flaking, dented inward, or has an unusual metallic, chemical, or stale odour. Do not scrape with metal tools or attempt to repair the vacuum wall.
- Food-contact suitability, steel composition, coatings, insulation, seal materials, temperature range, and hygiene performance are not confirmed. Follow the received manufacturer markings and local food-safety practice.
- Wash by hand with warm water and mild dish soap unless the received instructions expressly allow another method. Use a soft bottle brush for the interior and clean the rim, lid, cup, threads, and seals thoroughly.
- Do not use bleach, chlorine, abrasive powders, steel wool, solvents, oils, harsh chemicals, or strongly scented cleaners. Rinse completely and allow all parts to dry before reassembly.
- Dishwasher, microwave, oven, freezer, and hot-plate use are not confirmed. Do not put the mug, lid, cup, or seals in these appliances unless the received product instructions specifically permit it.
- Do not leave milk, juice, tea, coffee, or other perishable drinks at unsafe temperatures for extended periods. Empty and wash promptly after use to reduce odour and residue.
- Do not drop, throw, crush, use as a weight, stand on, or carry by the lid, small cup, or a loose handle. Condensation, temperature retention, dent resistance, rust resistance, durability, and spill protection vary.
- Keep away from children and pets; hot liquid, hard steel, small lid/cup/seal parts, packaging, and broken components may present burn, choking, ingestion, cut, and suffocation hazards. This is not a toy.
- Store clean, dry, open or loosely assembled to ventilate, and protected from heat, freezing, moisture, pests, crushing, sharp objects, children, and pets.
- Capacity, usable volume, insulation, temperature retention, comfort, handling, leakage, condensation, rust, finish, durability, and service life vary; no exact six-hour hot, twelve-hour cold, food-grade 304, rust-resistant, premium, powder-coated, leak-proof, condensation-free, or all-beverage result is guaranteed.
Specifications
-
Type: Insulated steel mug
-
Nominal capacity: Approximately 550 ml as listed
-
Features: Handle and small cup as shown
-
Dimensions: Approximately 12 cm × 9 cm × 16 cm
-
Weight: Approximately 401 g
-
Use: Selected hot or cold beverages subject to received instructions
-
Package contents: Mug/set configuration as received; accessories not confirmed unless stated
