Wall-mounted toothpaste dispenser with pump-style dispensing and multi-slot toothbrush storage for selected compatible tubes
Description
This BrushedUp bathroom organiser combines a toothpaste dispenser with a toothbrush-holder area. The listing describes vacuum-pump-style extraction, a 3M-style adhesive sticker, compatibility with most standard toothpaste tubes, and space for approximately 3–5 toothbrushes. Exact tube-neck dimensions, pump compatibility, dispensed volume, adhesive specification, wall load, moisture rating, material grade, and hygiene certification are not reliably stated. Check the received parts and toothpaste tube before installation.
Key features
- Pump-style toothpaste dispensing as listed; output may vary with tube, fill level, viscosity, alignment, and priming.
- Wall-mount format with 3M-style adhesive sticker as shown/listed; mounting strength depends on surface preparation, cure, load, moisture, and product condition.
- Toothbrush-holder area listed for approximately 3–5 toothbrushes; actual slots and clearance must be checked.
- Designed for selected standard toothpaste tubes; tube fit is not universal and tube/dispensing accessories are not included unless stated.
- Approximate dimensions and weight are not provided in the source listing; use the received product for installation planning.
- One dispenser/holder supplied unless the received package states otherwise.
Installation, oral-hygiene, and safety notes
- Inspect the dispenser, nozzle, pump mechanism, tube connector, toothbrush slots, adhesive, seams, and packaging before use. Do not use if cracked, loose, contaminated, leaking, blocked, or damaged.
- Use only a toothpaste tube that fits the received connector without force. Do not cut, pierce, puncture, heat, squeeze, or modify the tube unless its instructions specifically require it.
- Clean and dry a smooth, rigid mounting surface before applying the adhesive. Rough, textured, greasy, dusty, wet, damp, wallpapered, peeling, freshly painted, porous, or temperature-variable surfaces may not hold it.
- Press the mount evenly and follow the received adhesive instructions. Allow the stated cure time; if none is supplied, do not load the dispenser immediately. Test the empty mount and then add toothpaste gradually.
- Do not exceed the unconfirmed wall load. Do not hang towels, bottles, razors, bags, tools, or additional holders, and do not use the unit as a grab bar or support.
- Keep the dispenser away from direct shower spray, standing water, steam, condensation, sinks, heaters, flames, and high heat. Waterproofing and water resistance are not confirmed.
- Toothbrush storage is not the same as sterilisation or contamination prevention. Keep brush heads separated where possible, do not allow them to touch the dispensing nozzle, and replace brushes according to normal dental-care guidance.
- Do not share a nozzle or toothbrush slot between users unless cleaned and the arrangement is appropriate. Do not let toothpaste residue, saliva, food, cosmetics, or dirty hands contact the nozzle or inside of the holder.
- Prime and operate only as described by the received instructions. If dispensing becomes uneven, air enters, the tube slips, or the nozzle blocks, stop and clean rather than forcing the pump.
- Check the toothpaste label for ingredients, expiry, intended user, and allergy concerns. The dispenser does not make toothpaste safer, fresher, medically effective, or suitable for every person.
- Wipe the exterior with a soft, lightly damp cloth. Remove the tube and clean the nozzle, tube interface, toothbrush slots, seams, and residue using a method compatible with the received material; rinse only where permitted and dry completely.
- Do not immerse the dispenser, spray directly into the pump, use bleach, solvents, abrasives, oils, boiling water, or harsh chemicals, or attempt to sterilise by flame or microwave.
- Inspect the adhesive bond, wall surface, pump, nozzle, tube interface, toothbrush slots, and housing regularly. Remove the tube and stop use if the mount lifts, wall finish peels, plastic deforms, toothpaste leaks, or the mechanism cracks.
- Do not rely on the dispenser to measure a precise dose, eliminate waste, extract every last amount, prevent germs, replace hand hygiene, or protect children from toothpaste ingestion.
- Keep toothpaste, toothbrushes, adhesive pieces, small components, and packaging away from young children and pets. Supervise children’s brushing and follow the toothpaste label; ingestion of toothpaste or detached parts can be hazardous.
- Store spare tubes and removed components clean, dry, closed, and away from heat, moisture, chemicals, sunlight, children, and pets. Do not store a leaking or expired tube in the dispenser.
- Mounting, tube fit, dispensing, toothbrush capacity, cleanliness, moisture response, adhesion, material performance, durability, and service life vary; no exact-dose, universal, secure, dry, clean, hygienic, durable, non-toxic, child-safe, germ-blocking, waste-reducing, or complete-extraction result is guaranteed.
Specifications
-
Type: Automatic/pump-style toothpaste dispenser with toothbrush holder
-
Dispensing: Vacuum-pump-style extraction as listed; exact mechanism and output not independently confirmed
-
Mounting: 3M-style adhesive sticker as listed/shown
-
Toothbrush capacity: Approximately 3–5 as listed; actual slot fit must be checked
-
Tube compatibility: Selected standard tubes after connector and neck-size checks
-
Use: Dry, ventilated bathroom area away from direct water and heat
